Manufacturers
Below are the manufacturers associated with Space - Flight Segment:

AiTechnology
One of the most comprehensive film and paste adhesive lines that help our customers build their products with ultimate reliability at the lowest cost of manufacturing. In the case of film adhesives, besides having the first tacky epoxy film adhesive, AIT has pioneered a wide selection of self-supporting epoxy film adhesives without fiberglass. These products are engineered with the lowest temperature and pressure melt-flow properties to allow "Instant tack and cure without pressure." This provides true inline processing for stacked chips and substrate attach applications. The same inline productivity enhancements are also available in die and substrate paste adhesives that allow rapid curing at temperatures as low as 80°C. In addition, molecularly flexible cross-linkable films have been incorporated with copper foil and are used to provide patented applications of flexible circuits and interposers. Since 2009, AIT has also successfully developed and applied ultra-high temperature, moisture resistant, and low coefficient of thermal expansion (CTE) products for continuous operational use at 300°C in die and component attach applications.

ATP Applied Thin-Film Products
State-of-the-art thin-film circuit processing and fabrication. Inductor Coils, Microstrip Transmission Lines, Stand Off/Isolation Pads. Build-to-print services for a wide range of materials and metallization schemes. ATP fabricates circuits on substrates using As-Fired Alumina, Polished Alumina, Aluminum Nitride, Beryllium Oxide, Fused Silica/Quartz, Sapphire and Hi-K Dielectrics. Metallizations range from standard films to Aluminum, Chrome, Copper, Nickel, Gold, Palladium, Platinum, Titanium and Titanium Tungsten. Circuit features can include fine pitch conductors, integrated resistors, vias, wrap-arounds, double sided patterning, polyimide supported bridges, hollow plated vias and solid filled vias.

Bonding Source
Quick delivery of materials used in Microelectronics and RF/Microwave manufacturing. Bonding Source carries epoxy pastes, epoxy films and custom pre-forms, bonding wire, bonding ribbon and wire bonding tools.

Coining
Coining wire and ribbon are widely used as electrical interconnect materials in manufacturing microelectronic devices: Gold Wire & Ribbon, Aluminum and Silicon Aluminum Wire & Ribbon, SPM Power Bond Ribbon™ and Copper Wire of the highest quality.

CST Computer Simulation Technology
CST develops and markets high performance software for the simulation of electromagnetic fields in all frequency bands. The full list of CST products includes the following Software tools:
- CST STUDIO SUITE
- CST MICROWAVE STUDIO
- CST DESIGN STUDIO
- CST EM STUDIO
- CST PARTICLE STUDIO
- CST MPHYSICS STUDIO
- CST PCB STUDIO
- CST CABLE STUDIO
- CST BOARDCHECK
- Antenna Magus
- Optenni Lab
- Savant
- EMIT

Ducommun
Ducommun designs & manufactures Coax Switches, Switch Matrices, High Power RF Switches & Waveguide Switches.Coaxial switches are available from SPST through SP10T and offer frequency ranges up to DC to 46 GHz.

Eclipse MDI
Eclipse MDI was founded in 2001 and is a privately held California corporation that began in the heart of Silicon Valley, specifically for the purpose of providing high quality and state-of the-art, diverse RF and microwave products.
It provides a full array of RF & Microwave products and services, ranging from coaxial microwave assemblies to broadband monolithic microwave integrated circuits (MMICs) with frequencies ranging from DC to 40 GHz and beyond.

Egide
Hermetic packages: HTCC-metal and glass-metal seals
Photonics, RF & Hyper frequencies advanced designs
Complex multi-material assemblies and plating

Evans Capacitor
Evans Capacitor manufactures high energy density capacitors for demanding defense and aerospace applications. Typical applications replace standard military capacitors, or augment batteries and power supplies where size, weight, reliability and quality are important factors of component selection. Evans maintains the highest levels of quality, and is ISO 9001 and AS9001 registered.

Gowanda
Leading manufacturer of board-level magnetic inductive components for the OEM electronics marketplace. The product line includes axial-lead & surface mount RF and power inductors, chip coils, conicals, lead and lead-free designs, pot cores, qualified product list (QPL) components, shielded/unshielded designs, switching power supply magnetics, toroids, transformers, tunable coils, and application-specific configurations.

KVG
Crystals, Oscillators (PXOs, TCXOs, VCXOs, OCXOs...), Filters. Accuracy and reliability applications: Telecommunications (Wireline and Wireless) or Instrumentation.

Leach
Hermetic relays, SSPCs and Control Systems. Manufacturing facilities at France and USA.

Megaphase
MegaPhase designs, manufactures and markets high performance RF coaxial cables and connectors to OEMs building advanced microwave and optical electronic systems, such as test instrumentation, defense electronics, homeland defense, satellites, broadband data and communications systems. MegaPhase's core product is its industry-leading GrooveTube® technology, a unique cable design used in high reliability applications including test & measurement systems. MegaPhase has over 500 active customers in 30 countries, including the biggest names in electronic technology, as well as the US Government and its allies. Core Technology, Products & Applications
- Test & Measurement Cables and Test Adapters: MegaPhase GrooveTube® technology provides a clear differentiation from other cable technologies, and represents the first breakthrough cable technology in over 20 years. The products provide customers with a competitive edge over ordinary cable designs by addressing three important criteria for testing electronic components and systems: phase stability, insertion loss stability and repeatable measurements for the cable's useful life. This enables MegaPhase customers to calibrate most test sets with rate of recurrence far less than competitive products, and therefore achieve the "lowest cost per measurement"™ and more reliable test results.
- Interconnect Cables & Connectors - Low Loss, Low VSWR for Integrated Systems: MegaPhase also manufactures high performance coaxial cables using GrooveTube® technology for high power and phase-defined systems, including electronic warfare, telecommunications equipment and many other RF platforms on the ground, sea, air and space.
Facilities MegaPhase is headquartered in Stroudsburg, Monroe County, Pennsylvania, USA, where all aspects of design and manufacturing take place. The 20,000 square foot facility features:
- RF Testing on 100% of all shipped products using a state-of-the-art RF test lab including 5 microwave vector network analyzers ranging in capability from 10 MHz through 70 GHz.
- Semi-rigid cables are bent to the highest level of precision with a custom-designed, programmable CNC cable bending machine.
- MegaPhase uses advanced manufacturing techniques and manages its customer relationships using Microsoft Dynamics AX.
- Pro/ENGINEER Wildfire® design software and CST Microwave Studio® software are used for state-of-the-art design.

Micropac
Micropac Industries, Inc. provides optoelectronic components, electronic assemblies, multi-chip microelectronic modules and Programmable circuit heaters . Micropac also supplies application-specific electronics packaging solutions for applications that have complex specifications and no readily available solution. The company serves the aerospace, space (radiation tolerant), military, industrial, and medical markets. Micropac offers both custom and standard products from its DLA space and military qualified, ISO9001:2008 and AS9100 Rev C certified facilities. Our standard products include high reliability optocouplers, LEDs, LED displays, Hall Effect sensors, solid state relays, solid state power controllers, power operational amplifiers and optically isolated MOSFET switches.

Modelithics
Leader in providing simulation models for RF, microwave and millimeter-wave devices. Modelithics offers comprehensive measurement and modeling services, as well as highly accurate, scalable measurement-based models that integrate seamlessly with popular electronic design automation (EDA) tools. Their software products include libraries of high-accuracy passive and active component models. Available library models include parasitic models for RLC components, non-linear diode models, non-linear and noise models for low, medium, and high power transistors as well as system level component models for functional blocks like filters, attenuators, switches amplifiers and mixers. Modelithics model libraries load conveniently as "model pallets" or design kits within popular Electronic Design Automation (EDA) software such as Agilent ADS, Agilent GENESYS, and AWR Microwave Office . Modelithics also offers a broad array of measurement services, including S-parameters, noise parameters, pulsed IV, high power RF testing, and source/load-pull. They also specialize in extraction of equivalent circuit and black-box models for linear and non-linear devices that can be inserted into the most popular software tools on the market.

Netzer
Netzer Precision Position Sensors has taken a revolutionary position sensing technology (Electric Encoder™) based on the interaction between the measured displacement and space/time modulated electric field. It offers a blend of features unequaled by optical or magnetic encoders.

PPG Cuming Microwave
Innovative microwave absorber technology and materials for the RF Electromagnetic Interference, Radar Cross Section Reduction and Anechoic Chamber markets. From dielectric, artificial dielectrics, radomes, RF absorbers, and anechoic chambers for the international aerospace, electronics, and defense industries. From thin resonant absorption sheets to 12 foot pyramids to radar reflectors for mach speed aircraft; from do-it-yourself anechoic test chambers to turnkey anechoic chambers, Cuming Microwave’s engineering staff can support your efforts.

Semi Dice
Semi Dice is the only die processor with a High Reliability Division dedicated to value added processing. This unique structure of the company has allowed us to focus on our customers' individual requirements. Whether your requirements are for generic devices or product tested and supplied to your source control drawings, Semi Dice can react quickly to provide solutions.
- Semi Dice Hi Rel Division. Wafer sawing, wafer probing, Element Evaluation to Class H & K, testing to SCD's, Special visualing & loading available.
- Franchised/Authorized Lines. Both active and passive devices. Order die with complete confidence and manufacturer support.
- Extensive Inventory. Thousands of different bare die part numbers from dozens of different semiconductor manufacturers.

SemiGen
SemiGen is a full-service RF/microwave solutions company that provides the manufacturing services, components (Diodes), and other products needed to fill the voids in customer's supply chain and manufacturing department.

Southwest Microwave
The Microwave Products Division (MPD) was established in 1987 to provide the highest performance interconnect products for millimeter wave and high-power RF applications. We continue to focus on high-end products to increase end-product performance. High Performance Connectors and Adaptors up to 67GHz. Militar, Aerospace and Commercial Applications. SSMA (Super SMA) that runs up to 27GHz with VSWR 1.15:1. Special High Density Connectors up to 110GHz.

Sumitomo Electric
Power transistors for radiolinks, SatCom, RADAR and Space applications. GaAs and GaN technologies for frequencies up to Ka band.

Taconic Advanced Dielectric Division
Taconic Advanced Dielectric Division manufactures PTFE/woven glass base materials for microwave, RF and high speed digital applications. Applications include LNAs, LNBs, PCS/PCN antennas, GSM and UMTS antennas, power amplifiers, filters, passive components, automotive cruise control, aerospace guidance telemetry, phase array radar, etc.

Tronser
Design and manufacture of Air Variable Capacitors for professional electronics. Today TRONSER offers the widest range of High-Q Trimmer Capacitors in the world. This experience combined with fully equipped research, development and testing facilities up to 26 GHz, CAD for the mechanical design of components and production machinery, in-house parts production on CNC-machines, plating, tool shop, injection molding machines have made us the prefered partner of all major electronics companies around the world when it comes to Trimmer Capacitors. In the last years they have extended their product range to custom Turned and Milled Components and completely assembled systems.

Varioprint
Printed Circuit Boards (PCB) manufactured with materials for High Frequency and Complex multilayer Circuits.

Vectrawave
VectraWave’s mission is to develop MMIC solutions up to 100GHz, using the best available processes in order to optimize cost, performances, power consumption and “small form factor packaging”, and addressing the Military, Satcom, Telecommunications/Optical, Wireless, and Test & Measurements markets.
VectraWave has MMIC design expertise across a broad range of foundry processes, including Gallium Arsenide (GaAs), Gallium Nitride on Silicon Carbide (GaN/SiC), Indium Phosphide (InP), Silicon Germanium (SiGe), and Complementary Metal Oxide Semiconductor (CMOS).
VectraWave, an ISO9001 certified company, has a long history of developing high-performance MMICs. After carefully listening to your requirements, we are confident that our experienced team will develop the best technical and cost-effective solutions to help you be successful in the marketplace.

Weinschel Associates
Design and manufacture of high-quality Broadband RF and Microwave products for commercial and military markets: Fixed and Variable Attenuators, Terminations, Power Dividers and Splitters, RF Adaptors and DC Blocks. Core technologies originated by founder Bruno Weinschel are leveraged using modern design, production, delivery, and service techniques to provide the best product at the best price to our customers. Founded by Bruno Weinschel, Weinschel Associates’ foundation is a 40 year legacy as a supplier of high performance, high quality Broadband Passive Components to the RF and Microwave communities. At the core is proven engineering and manufacturing techniques, which produce better yields at higher accuracies with improved typical performance – both to attenuation and VSWR versus frequency, as well as low power and temperature coefficients.